2024 Landoll B30AC / B40AC Forklift B30AC

Current Landoll Material-Handling Bendi B30AC-B40AC-Forklift

Swipe to View More

Year 2024
Make Landoll
Model B30AC / B40AC Forklift

BENDI NARROW AISLE ELECTRIC FORKLIFT

The Bendi B30AC and B40AC forklifts work in aisles as narrow as 78" (1.98M), have a starting capacity of 3,000 lbs (1361 kg) at 24" (600mm) load center and lift heights available to 26' (7.92M).

They are 4-wheel articulating forklifts with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available making this unit excellent for loading/unloading trailers and containers. The Bendi B30AC and B40AC can also work inside and outside on paved surfaces and have a floating front axle allowing the trucks to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the Landoll DuraSteer™ front wheel hydraulic steering, the B30AC/B40AC provides exceptional control and makes load placement and retrieval superior to the competition.

MAXIMIZES MATERIAL HANDLING PRODUCTIVITY

The versatile Bendi B30AC/B40AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, yet operates in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. This forklift can go from inside the truck to the rack eliminating staging and additional operators and support forklifts.

Features may include:

3,000 lb. (1361kg) and 4,000 lb. (1814kg) Capacity at 24" (600mm) Load Center

Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking and Traction

Ergonomic Design for Exceptional Operator Comfort and Safety

Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless

DuraSteer™ Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control

Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle

Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators

High Visibility Mast Allows Optimum Safety and Control

AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency

High Efficiency Curtis AC Controllers Provide Trouble Free Operation

Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)

48 Volt Electrical System and Large Capacity Battery Compartment

Motor

Motor Power Hydraulic - Continuous Duty Rating: 12 kWh | Traction - Continuous Duty Rating (type/kWh): 5.1 Ea / 10.2 Total

Wheels & Tires

Wheels Front (2 Each) Smooth Poly-Dia x Face: 14x5 in (356x127 mm) | Rear (2 Each) Smooth Rubber-Dia x Face: 18x7 in (457x178 mm)

Operational

Operating Speed Travel - Loaded: 6.5 mph (10.5 kph) / Unloaded: 7 mph (11.3 kph) | Lift - Loaded: 90 fpm (27.4 mpm) / unloaded: 110 fpm (33.5 mpm) | Lowering - Loaded: 100 fpm (30.5 mpm) / Unloaded: 90 fpm (27.4 mpm)

Operating Conditions Gradeability - Loaded / Unloaded: 15%

Dimensions

Dimensions Mast Til - Fwd / Back - Up to 293" (7.44M): 3 / 3 deg, Fwd / Back - 294" (7.46M) and Higher: 1 / 2 deg | Lost Load Center: 12 in (305 mm) | Rear Overhang: 25 in (635 mm) | Underclearance - Under Mast: 3 in (76 mm) | Out to Out Fork Spread - Minimum / Maximum: 9.4-39.5 in (239-1,003 mm) | Right Angle Stacking Aisle with 48"L x 40"W (1,200mm x 1,000mm) Load: 78 in (1,981 mm) | Intersecting Aisle with 48"L x 40"W (1,200mm x 1,000mm) Load: 108 in (2,743 mm)

Wheelbase 63 in (1,600 mm)

Overall Length Fork to Face - Mast Vertical: 100 in (2,540 mm)

Height Operator Floor: 31 in (787 mm) | Overhead Guard: 89 in (2,261 mm) | Battery Compartment: 19 in (483 mm)

Width Overhead Guard: 40 in (1,016 mm) | Fork Carriage: 41 in (1,041 mm)

Overall Width 45 in (1,143 mm)

Length Fork: 40 in (1,016 mm)

Capacities

Hitch Lift Capacity At 24" (600mm) Load Center: 3,000 lbs (1,361 kg)

Weights

Weight With Battery: 13,630 lbs (6,182 kg)

2024 Landoll B30AC / B40AC Forklift B30AC